John Guest SpeedfitSKU: FMSF903A
JG Speedfit 22 x 15mm Spigot Reducer
(PEM062215W)£2.79
Ex.VAT
In stock
| Multibuy Deals Discount applied in basket | ||
|---|---|---|
| 10+ units | £2.54 Ex.VAT | Save 8.96% |
Product features:
- Provides a rapid tool-free transitional connection between 22mm and 15mm pipework
- Constructed from cross-linked polyethylene to prevent thermal deformation up to 95°C
- Internal stainless steel grab ring and EPDM seal ensure a robust 12 bar pressure rating
- Fully demountable collet mechanism facilitates easy adjustment in confined spaces
- Dramatically reduces on-site installation time compared to traditional capillary soldering
Sign in to BuyNew customer? Create an account
John Guest SpeedfitSKU: FMSF903A
JG Speedfit 22 x 15mm Spigot Reducer
(PEM062215W)£2.79
Ex.VAT
In stock
| Multibuy Deals Discount applied in basket | ||
|---|---|---|
| 10+ units | £2.54 Ex.VAT | Save 8.96% |
Product features:
- Provides a rapid tool-free transitional connection between 22mm and 15mm pipework
- Constructed from cross-linked polyethylene to prevent thermal deformation up to 95°C
- Internal stainless steel grab ring and EPDM seal ensure a robust 12 bar pressure rating
- Fully demountable collet mechanism facilitates easy adjustment in confined spaces
- Dramatically reduces on-site installation time compared to traditional capillary soldering
Sign in to BuyNew customer? Create an account
The JG Speedfit 22 x 15mm spigot reducer is a highly advanced push-fit transitional connector designed to securely bridge dissimilar pipe diameters within demanding domestic plumbing circuits. Engineered in the UK, the fitting features an incredibly robust cross-linked polyethylene body that effectively resists thermal deformation even when subjected to peak operating temperatures of 95°C. The internal architecture utilises a premium EPDM O-ring and stainless steel grab ring to deliver an immediate, watertight mechanical seal upon insertion, allowing for rapid tool-free assembly that reduces overall installation time by up to 40% compared to traditional soldering.
Operating reliably under system pressures up to 12 bar, this WRAS approved white plastic fitting is fully compatible with copper, PEX and PB piping across both potable cold water and central heating manifolds. The intelligent design incorporates a demountable collet mechanism; by twisting and unlocking the outer plastic nut, the installer can push the collet inward to effortlessly release the pipe. This non-permanent configuration is particularly beneficial during complex retrofits in confined under-floor or partition wall spaces, completely eliminating the hazard and administrative burden of hot works.
Q: What pipe materials can be connected using this spigot reducer?
A: The fitting safely integrates with standard copper, PEX and polybutylene pipework, providing appropriate manufacturer inserts are used on plastic lines.
Q: Is the connection permanent once the pipe is inserted?
A: No, the intuitive collet mechanism allows the joint to be easily demounted and adjusted without causing damage to the pipe.
Q: What is the maximum operating temperature for this component?
A: The cross-linked body and EPDM seals can comfortably withstand maximum circuit temperatures up to 95°C.
Q: Does this component require specialist tools for installation?
A: The push-fit mechanism is entirely tool-free, requiring only a clean pipe cut and manual insertion to achieve a watertight seal.
Operating reliably under system pressures up to 12 bar, this WRAS approved white plastic fitting is fully compatible with copper, PEX and PB piping across both potable cold water and central heating manifolds. The intelligent design incorporates a demountable collet mechanism; by twisting and unlocking the outer plastic nut, the installer can push the collet inward to effortlessly release the pipe. This non-permanent configuration is particularly beneficial during complex retrofits in confined under-floor or partition wall spaces, completely eliminating the hazard and administrative burden of hot works.
Q: What pipe materials can be connected using this spigot reducer?
A: The fitting safely integrates with standard copper, PEX and polybutylene pipework, providing appropriate manufacturer inserts are used on plastic lines.
Q: Is the connection permanent once the pipe is inserted?
A: No, the intuitive collet mechanism allows the joint to be easily demounted and adjusted without causing damage to the pipe.
Q: What is the maximum operating temperature for this component?
A: The cross-linked body and EPDM seals can comfortably withstand maximum circuit temperatures up to 95°C.
Q: Does this component require specialist tools for installation?
A: The push-fit mechanism is entirely tool-free, requiring only a clean pipe cut and manual insertion to achieve a watertight seal.